Quick Answer: What To Do When Your WAN Connection Is Down?

How do I fix my Telstra WAN connection?

I keep getting a TELSTRA GATEWAY MAX message – ” your WAN connection is down”.

The only way I can fix it is too power down my cable modem, unscrew the cable connection, wait 10 – 20 seconds then rescrew the connection and power up the modem (Netgear Telstra Gateway Max C63008D – 1TLAUS)..

Do you need WAN for WIFI?

In short, LAN ports on a router allow Ethernet-ready devices to connect to one another and share data. In order for them to also access the internet, the router needs to have a Wide Area Network (WAN) port.

Is Wan A Internet?

Internet is a communication protocol for worldwide network (WAN = Wide Area Network). … LAN are independent networks but may be linked within a WAN through Internet devices such as Routers.

Should wan be enabled?

If an attacker knows your IP address, this will prevent them from finding anything else out. The router will ignore pings from the WAN side (the Internet), as well as hide portscans. Since you’re not using port forwarding, you don’t have any need of your own WAN IP, so feel free to enable it.

What is the best WAN connection type?

Circuit-switched connections are currently the most popular type of WAN connection. Circuit switching transmits data streams and datagrams across dedicated physical circuits. To provide asynchronous dial-in and ISDN services, the telephone companies use circuit switching.

What is LAN connection?

A local area network (LAN) is a computer network that interconnects computers within a limited area such as a residence, school, laboratory, university campus or office building. … Ethernet and Wi-Fi are the two most common technologies in use for local area networks.

What does WAN connection mean?

wide area networkA wide area network (WAN) connection allows devices to connect over a wide geographic area without utilising public internet. Without a WAN, information can only travel within the local area network (LAN), such as in one office. For businesses wanting to collaborate across multiple locations, a WAN is essential.

Should I activate IPv6?

Best answer: IPv6 can potentially add support for more devices, better security, and more efficient connections. While some older software may not work as expected, most of your network should work fine with IPv6 enabled.

How do I reset my WAN?

The router will restart after the factory reset. In the router portal, select Router > Reset Configuration and click on Reset configuration. In the router portal, select Router > WAN Reset and click on WAN reset. The WAN will now be reset.

How do I enable WAN connection?

With the Google Home appOpen the Google Home app .Tap Wifi Settings. Advanced Networking.Tap WAN.Choose Static IP.Enter the IP address, subnet mask, and internet gateway provided by your ISP. … After the changes are saved, reconnect the Ethernet cable to your router or primary Wifi point and modem.

Why is my wan not working?

To troubleshoot your WAN or LAN port: Plug in the power adapter of your router to the power outlet. Turn on the router and wait for the power LED to become solid green or white. … Take one Ethernet cable, and connect one end to any of the router’s LAN port, and the other end to the router’s WAN port.

How do I find my WAN settings?

If a server or computer is used instead of a router, use command prompt to run the command “ipconfig /all” without quotes. The WAN IP will be given under the section for the network adapter that connects the system to the Internet.

Is Wan faster than LAN?

The network speed, the speed of which data packets are transported, is faster for a LAN than for a WAN. … WAN spends depend on the type of WAN service being used but will never be as fast as Ethernet LANs because the sole aim of a WAN is to transfer data between one LAN to another.

Why is wan light flashing?

If the WAN light is continually flashing, this indicates that your modem is not seeing the network in order to connect. The fact that you can view the modems interface (http://10.0.0.138) means that your computer is able to communicate with the modem.